#	Edited by JL 5/22/22, 1/9/23
#pause = true
#ask = true

date = 1.0611
slitpa = 0.
fitsdir=archive
hrfl = 100.8
xdfl = 76.6

########################
PI=Engineering
PID=2001A999
########################

#krot = -0.03
#slitrot = 0.01	# default looks good
shift = false
bounce = 0.2
subsky = true	# runs very slowly for longslit data.  but does help
wno0 = 587.00 
extmode = int
extint = 103 142 26 65
aboo.1008

wno0 = 586.97
sumspec = NGC5461
ngc5461.1009
skip = 9
ngc5461.1010
ngc5461.1011
ngc5461.1012
ngc5461.1013
ngc5461.1014
ngc5461.1015
ngc5461.1016
ngc5461.1017
ngc5461.1018
storesum

wno0 = 586.87
pallas.1019

#########################
PI=Zhu
PID=2001A102
#########################

#pause = true
slitrot = 0.
#ask = true
#verbose = false
#krot = -0.03
#extmode = con
#negative peaks at pixel 6, positive peaks at pixel 19
#negative beam might fall off the edge
#extint = 13 24 1 12  #exact edges are 15 23 1 10, negative peaks at 6, positive
shift = true # let pipe do shift for nod data
bounce = -0.2 
weight = true 
extmode = conint
extint = 2 25
#setwno
wno0 = 780.35   # use 4th order 780.363 or 5th order 781.1302
hrr = 9.569
pallas.1020 # nod data
shift = false
weight = false
scansum = false
shiftint = 2 25

objtype=calibration
subsky = false

#flat.1020
#flatmode = old	# Why?  The flats look OK.
pallas.1021
#pallas.1022 #not good
pallas.1024
pallas.1025
pallas.1026
wno0=780.3495
pallas.1027 #best observation

objtype=target

#setwno
wno0 =780.358   #use 4th order 780.363 or 5th order 781.1302
hrr = 9.563
weight = false
shift = false
sumscan = false
g589.1028
g589.1029
g589.1030
g589.1031
g589.1032
g589.1033

objtype=calibration

ceres.1034  #rejecting scan
ceres.1035
ceres.1036 #rejecting scan

objtype=target

#flatmode = old
g589.1037
#flatmode = old
g589.1038
#setwno  #using 780.7978 and 781.1807 in 5th order
wno = 780.355 
g3430.1039	# these 3 are getting rejected by fife for some reason
g3430.1040
g3430.1041
#if using old flat setwno is not necessary
wno0 = 780.354  #use 4th order 780.363 or 5th order 781.1302
g2996.1042
g2996.1043
g2996.1044
g2996.1045
g2996.1046
wno0 =780.352  #use 4th order 780.363 or 5th order 781.1302
hrr = 9.567
g4547.1047
g4547.1048
wno0 = 780.352 #use 4th order 780.363 or 5th order 781.1302
hrr = 9.568
g4545.1049
wno0=780.352 
g4545.1050
wno0=780.352
g4545.1051
g4545.1052
g4545.1053
wno0 = 780.351 #use 4th order 780.363 or 5th order 781.1302
hrr = 9.569
g3392.1054
g3392.1055
g3392.1056
g3392.1057
hrr = 10.0
wno0 = 780.652   #use 5th order 780.363 or 4th order 780.5035
n7538.1058
n7538.1059
n7538.1060
n7538.1061
n7538.1062
n7538.1063
n7538.1064  #seems bad, over bounce limit -0.2
n7538.1066
n7538.1067
n7538-9.1068

kbd
end